Telephone: 1-800-599-2040

Barn Gates

Custom Built To Fit Your Barn

Standard Features for Heavy Duty Gates

  • 48″ high with 5 bars
  • 3/16″ formed channel on gate ends
  • 1.9 O.D. x 12 ga. hi-tensile tubing
  • Vertical spacers notched for maximum strength
  • Length is CUSTOM FIT for your opening
  • Dip painted burgundy

Optional Features for Heavy Duty Gates

  • Height and number of bars to your requirement
  • Rods in bottom openings to confine small animals
  • Cutouts for curbs or waterers
  • Pass through
  • Powder coating in your choice of colors
  • Hot dipped galvanized finish
Steinway Barn Gates

click to enlarge

Mounting Hardware

click to enlarge

2-way Gate Latch

2-way gate latch

Our 2-way gate latch is designed to give you many years of trouble free service. It has no pins to come loose or springs to break. It is a completely welded unit that is nearly indestructible.

  • 1/4″ mounting plate
  • 3/8″ locking pins
  • Requires 1 1/4″ od stub
  • 5 1/4″ wide x 11″ high

click to enlarge

2-way Latch with Bracket

2-way Latch w/Round Post Bracket

This is the same 2-way gate latch as pictured above except with the additional bracket to fasten to a round post. This bracket eliminates the need to weld the latch to your post, by using self-threading bolts instead. Latch pictured is hot dipped galvanized.

  • 1/4″ mounting plate
  • 3/8″ locking pins
  • Requires 1 1/4″ od stub
  • 5 1/4″ wide x 11″ high
  • brackets can be made for almost any diameter of post

click to enlarge

1-way Gate Latch

1-way Gate Latch

Our 1-way latch is designed to work for either right or left swinging gates. Like our 2-way latch, it does not have pins, bolts or springs to wear out, come loose or break.

  • 3/8″ thick mounting plate
  • 3/8″ thick locking pin
  • Requires 1 1/4″ od stub
  • 3″ wide x 11″ high

click to enlarge

Chain Plate Latch

Chain Plate

For situations where a latch is not practical or impossible to mount, our chain plate latch will hold your gate securely. Your chain bolts directly to the chain plate, this ensures it will not be lost and will always stay with the gate.

  • Made from 1/4″ plate
  • Welded directly to gate
  • Uses 3/16″ chain

click to enlarge

Hinge Plate

Hinge Plate

For the simplest and most durable way to hang your gate, use our hinge plate. It eliminates the need to measure and space your hinge pins correctly on your post. Simple fasten it to your post and hang your gate.

  • 3/8″ back plate
  • 3/4″ od hinge pins
  • Standard sizes in stock: 36″, 38″, 48″

click to enlarge

Weld On Hinge

Weld-on Hinge

If you are handy with a welder and want to weld the hinges to your post, the weld-on hinge set is the way to go. With no back plates there is less material, which means less cost to you.

  • 3/4″ od hinge pins
  • 1″ square block spacer
  • top pin has hole for lock pin

click to enlarge

Round Post Hinge

Round Post Hinge

Welding to a galvanized post can be a challenge and unpleasant. Our round post hinge bracket enables you to bolt your hinge to a round post using self-threading bolts.

  • 3/4″ od hinge pins
  • Uses 8 – 3/8″ bolts per hinge set
  • Many sizes available

Steinway Barn Gate Gallery

Click on the pictures for larger images.

Back to Top