We offer a variety of options for hinging and latching our gates. Whatever your application may be, we are sure to have a solution that works for you.
Latches
2-way gate latch
Our 2-way gate latch is designed to give you many years of trouble free service. It has no pins to come loose or springs to break. It is a completely welded unit that is nearly indestructible.
- 3/16″ mounting plate
- 3/8″ locking pins
- Requires 1 1/4″ od stub
- 5 1/4″ wide x 9″ high
2-way Latch w/Round Post Bracket
This is the same 2-way gate latch as pictured above except with the additional bracket to fasten to a round post. This bracket eliminates the need to weld the latch to your post, by using self-threading bolts instead. Latch pictured is hot dipped galvanized.
- 3/16″ mounting plate
- 3/8″ locking pins
- Requires 1 1/4″ od stub
- 5 1/4″ wide x 9″ high
- brackets can be made for almost any diameter of post
2-way Latch w/Bolt-On Metal Post Bracket
This is the same 2-way gate latch as pictured above except with a handy bolt-on bracket to fasten to a round post. This bracket eliminates the need to weld the latch to your post and makes the height super easy to adjust when installing. Latch pictured is hot dipped galvanized.
- 3/16″ bolt-on plate
- 3/8″ locking pins
- Requires 1 1/4″ od stub
- 5 1/4″ wide x 9″ high
- brackets can be made for almost any diameter of post
1-way Gate Latch
Our 1-way latch is designed to work for either right or left swinging gates. Like our 2-way latch, it does not have pins, bolts or springs to wear out, come loose or break.
- 3/8″ thick mounting plate
- 3/8″ thick locking pin
- Requires 1 1/4″ od stub
- 3″ wide x 9″ high
Chain Plate
For situations where a latch is not practical or impossible to mount, our chain plate latch will hold your gate securely. Your chain bolts directly to the chain plate, this ensures it will not be lost and will always stay with the gate.
- Made from 1/4″ plate
- Welded directly to gate
- Uses 3/16″ chain
Two Way Barricade Latch
The new Barracade latch designed and manufactured by Steinway Equipment features smooth and fool-proof operation. Stop in to check it out or give us a call.
- Zinc plated steel
- No spring design
- Compact and reliable
One Way Barricade Latch
The new Barracade latch designed and manufactured by Steinway Equipment features smooth and fool-proof operation. Stop in to check it out or give us a call.
- Zinc plated steel
- No spring design
- Compact and reliable
Two Way Mini Barricade Latch
The new Barracade latch designed and manufactured by Steinway Equipment features smooth and fool-proof operation. Stop in to check it out or give us a call.
- Zinc plated steel
- No spring design
- Compact and reliable
Clamp on Gate Stub
Want to use Steinway’s gate latches with your existing gates? No problem. Our clamp on gate stub is designed to work with any of our latches.
- 1 1/4″ outside diameter stub
- Made from 1/4″ plate
- Fits almost any gate
Clamp On Gate Stub
Want to use Steinway’s gate latches with your existing gates? No problem. Our clamp on gate stub is designed to work with any of our latches.
- 3/4″ outside diameter stub
- Made from 1/4″ plate
- Fits almost any gate
Hinges
Lag Post Hinge
- 3/4″ od x 2″ Hinge Pin
- 3/4″ x 6″ Lag Screw
- Zinc Plated
Bolt Post Hinge
- 3/4″ od x 2 3/4″ Hinge Pin
- 3/4″ x 12″ Threaded (max. post size – 10 3/4″)
- Zinc Plated
Hinge Plate
For the simplest and most durable way to hang your gate, use our hinge plate. It eliminates the need to measure and space your hinge pins correctly on your post. Simple fasten it to your post and hang your gate.
- 3/8″ back plate
- 3/4″ od hinge pins
- Standard sizes in stock: 36″, 38″, 48″
Weld-on Hinge
If you are handy with a welder and want to weld the hinges to your post, the weld-on hinge set is the way to go. With no back plates there is less material, which means less cost to you.
- 3/4″ od hinge pins
- 1″ square block spacer
- top pin has hole for lock pin
Round Post Hinge
Welding to a galvanized post can be a challenge and unpleasant. Our round post hinge bracket enables you to bolt your hinge to a round post using self-threading bolts.
- 3/4″ od hinge pins
- Uses 8 – 3/8″ bolts per hinge set
- Many sizes available